To adjust the brightness of your Neumann studio monitor's logo in the MA1 app, follow the steps below:
First, download the MA1 software from the Neumann Download Center if you haven't already.
After downloading, launch the software and ensure it is updated to the latest version.
During this below, MA 1 may prompt you to update your studio monitors. We highly recommend doing so—just ensure the update process is not interrupted.
Note: If you have already set up or calibrated your speakers with MA1 before, please skip to Step 5.
Prerequisite:
- You will need a Cat5e (or higher) Ethernet cable connected to your Neumann studio monitor
- You will also need to make sure you have IPv6 enabled on your computer or laptop.
Step1: Please select the correct network adapter connected to your Studio Monitor & Click on Continue
Step 2: Click on Create new setup
Step 3: Select your KH 120 Monitors & Click on Continue
Step 4: Click on Save
Step 5: Click on the Gear icon on the top right
Step 6: Enter your desired brightness value for the Neumann logo on your monitor, then press Enter to see the change reflect in real time.
You can uncheck the Global checkbox to adjust the brightness of each monitor individually.
Step 7: Click the gear icon again or simply close the MA1 app, and wait for it to save the values to your studio monitor. You're all set!